Miofol 125G
Miofol® 125G is a reinforced technical construction membrane. Due to its very effective UV-stabilised reinforcement, Miofol® 125G is able to maintain its strength for an extremely long period of time. The micro-perforations, and the density of these perforations, ensure the best possible water-resistance in this category, while retaining high permeability.
Miofol 125G
Miofol® 125G is a reinforced technical construction membrane. Due to its very effective UV-stabilised reinforcement, Miofol® 125G is able to maintain its strength for an extremely long period of time. The micro-perforations, and the density of these perforations, ensure the best possible water-resistance in this category, while retaining high permeability.
1,50 x 25 m Article no. 6212415026
1,50 x 50 m Article no. 6212415001
2,00 x 50 m Article no. 6212420000
2,60 x 50 m Article no. 6212426000
Applications
Miofol® 125G is used on the outside of facades as water-repellent and permeable layer. Thanks to the unique micro-perforations, damp in the form of vapor inside buildings can be expelled to the outside. Miofol® 125G is also used as a temporary glazing membrane to protect facade openings against wind and rain during the construction process.
Processing
Miofol® 125G is micro-perforated and must thus be placed away from hard surfaces. For example, in facades with a soft surface (like mineral wool), Miofol® 125G can be placed directly against the soft surface. Miofol® 125G must be placed in the same way as roof tiles. Keep an overlap of minimum 150 mm and maximum 200 mm. Use staples or battens to attach the membrane to the construction. Always apply Miofol® 125G so the printed side faces outwards. Use VAST-R® Membrane tape basic to tape over staples, joints and overlaps. Use VAST-R® Butyl tape or Tyvek® FlexWrap tape to make openings and joints wind- and watertight. VAST-R® Butyl tape must be placed under the battens to create an effective water barrier, and to extend the lifespan.
Benefits
Water-repellent
Permeable
Extremely high pull- and tear-resistance
KOMO-certified
Chemical resistance
Light permeable
Long-term effectiveness thanks to virgin composition featuring UV additives
Unique micro-perforation
Produced in the Netherlands
Specifications
Weight 125 gr / m²
Fire class F
Water tightness W2
Water vapour resistance Sd 0,28 m
Water vapour transmission 86 gr / m² / day
Tensile strength machine direction 305N / 50 mm
Tensile strength cross direction 310N / 50 mm
Elongation machine direction 13%
Elongation cross direction 16%
Tear resistance machine direction 320N
Tear resistance cross direction 300N
Temprature resistance -40°C / 80°C
Construction phase 6 months