Noise Shield
Noise Shield® is an acoustic protection system, which consists of separation slats, cavity filling panels, edge strips and a sealant. Noise Shield® is used to improve noise insulation in walls and sloping-roof constructions. A single package can be used for 3 m2 of wall surface area.
The box contains
• 7 separation slats (LxWxH: 1200 x 60 x 50 mm)
• 4 cavity filling panels (LxWxH: 1200 x 540 x 40 mm)
• 1 tube of sealant (Acoustic sealant)
Noise Shield
Noise Shield® is an acoustic protection system, which consists of separation slats, cavity filling panels, edge strips and a sealant. Noise Shield® is used to improve noise insulation in walls and sloping-roof constructions. A single package can be used for 3 m2 of wall surface area.
The box contains
• 7 separation slats (LxWxH: 1200 x 60 x 50 mm)
• 4 cavity filling panels (LxWxH: 1200 x 540 x 40 mm)
• 1 tube of sealant (Acoustic sealant)
6 x 12 m Article no. 8612005000
Applications
Noise Shield® can be used for the inside of facades, walls and sloping roofs. The various components jointly create an effective solution against airborne sound. In practice, it is possible to realise a reduction in noise-related nuisance of 5 to 10 dB (depending on the specific situation). Noise Shield® also helps to improve thermal insulation.
Processing
The slats are used, together with acoustic cavity filling and plasterboard, to create a complete system that resembles a double wall.
Benefits
Thermal insulation (Rd = 1.16 m2K/W)
The glued seal between the elastic core and the upper and lower frames is watertight (class B3)
Reduction in noise-related nuisance of between 5 and 10 dB
Specifications
Impact plugs / screws (min. 40 mm long) for rules
Vapour control membranes/tape for exterior partition constructions
Mass plating: 2 layers of 12.5 mm plasterboard plating
Sheet metal screws and finish
If you install Noise Shield on a pitched roof, you will need wooden battens
Tools for processing: drill / screw machine, hand or circular saw