Miofol® 125S from Meuwissen Gerritsen is a reinforced vapour controlling technical construction membrane. The composite membrane has an extremely long life due to the use of virgin PE. Vapour from the room cannot enter the structure or insulation through Miofol® 125S. The Miofol® 125S Plus features an integrated adhesive strip that eliminates the need for tape at the overlaps.
| Size | Article no. |
|---|---|
| 1,50 x 25 m | 6112415026 |
| 1,50 x 50 m | 6112415010 |
| 2,00 x 50 m | 6112420010 |
| 2,60 x 50 m | 6112426010 |
| 1,50 x 50 m | 6112415011 (incl. integrated adhesive strip) |
Miofol® 125S is used on the warm side as a vapour control membrane in wall and roof constructions. Due to its constant vapour controlling property, Miofol® 125S is suitable in constructions of buildings belonging to climate class 2 and 3, such as houses, offices, schools, etc. Miofol® 125S is reinforced with a reinforcement mesh and thus withstands high mechanical loads, also during transport of prefabricated elements. Miofol® 125S protects the structure from moisture and provides optimum airtight insulation.
Apply Miofol® 125S on the warm side of the wall and roof construction. Attach the membrane to the underlying structure using staples. The logo should be legible from the inside. Observe 100 mm at horizontal and vertical overlaps. For optimal vapour control, we recommend taping staples, seams and overlaps with VASTR membrane tape basic. Seal penetrations and connections wind and watertight with VASTR Butyl tape or Tyvek FlexWrap tape.
