Miofol® 90G
Miofol® 90G is a reinforced technical façade membrane. The microperforation and the perforation density ensure water resistance while maintaining vapour permeability.
Cold insulation side
Gallery
Availability
| Size | Article no. |
|---|---|
| 1,50 x 25 m | 6209015022 |
Miofol® 90G is used as a water-resistant, vapour-permeable layer on the exterior side of façade constructions. Thanks to the microperforation, (construction) moisture can be transported to the outside in the form of vapour.
Miofol® 90G is microperforated and must therefore be installed without a hard backing surface. In façades with a soft substrate, for example mineral wool, Miofol® 90G may be applied directly onto the soft substrate. Miofol® 90G must be installed in a shingle-like (overlapped) manner. Maintain overlaps of at least 150 mm and at most 200 mm. Fix the membrane to the structure using staples or clamping battens. Always install Miofol® 90G so that it is readable from the outside. Seal staples, seams and overlaps with VASTR® Folie tape basic. Seal penetrations and connections wind and watertight with VASTR® Butyl tape or Tyvek® FlexWrap tape. For optimal water resistance and service life, VASTR® Butyl tape should be applied under the counter batten.
Miofol® 90G is a lightweight version of Miofol 125G and is therefore suitable for less demanding façade applications.
- Water-resistant
- Vapour-permeable
- Suitable as temporary glazing
- Weight
- 90 gr /m²
- Fire class
- F
- Water tightness
- W2
- Water vapour resistance
- Sd 0,3 m
- Water vapour transmission
- 80 gr / m² / day
- Tensile strength machine direction
- 175N / 50 mm
- Tensile strength cross direction
- 125N / 50 mm
- Elongation machine direction at break
- 12%
- Elongation cross direction at break
- 14%
- Nail tear resistance machine direction initial length
- 165N
- Nail tear resistance cross direction initially
- 170N
- Temperature resistance
- -20°C / 70°C
- Open construction phase
- 3 months
