Miofol® 100S
Miofol® 100S is a vapour control 3 layer COEX membrane with exceptional barrier properties. Vapour from the room cannot enter the structure or insulation through Miofol® 100S.
Warm insulation side
Gallery
Instruction video
Availability
| Size | Article no. |
|---|---|
| 1,50 x 50 m | 6110015010 |
Miofol® 100S is used as a vapour control membrane in wall and roof constructions. The membrane is applied to the warm side (usually the inside) of the structure. Due to its constant vapour control property, Miofol® 100S is suitable in constructions of buildings belonging to climate class 2 and 3, such as homes, offices, schools, etc. Miofol® 100S is composed of three layers and thus resists high mechanical loads, also during transport of prefabricated elements.
Apply Miofol® 100S to the warm side (usually the inside) of the roof and wall construction. Attach the membrane to the structure behind using stainless steel staples or VASTR® Double-Sided tape. The logo should be legible from the inside. Observe 100mm at horizontal and vertical overlaps. For optimal vapour control, we recommend taping the staples, seams and overlaps with VASTR® membrane tape basic. Air seal penetrations, connections and recesses using our VASTR® range and Tyvek® FlexWrap tape.
- Waterproof
- Consists of 3 layers
- Exceptional barrier properties
- Air-tight
- Processing faster than folded film
- Weight
- 100 gr /m²
- Fire class
- E
- Water tightness
- W1
- Water vapour resistance
- Sd 100 m
- Tensile strength machine direction initially
- 180N / 50 mm
- Tensile strength cross direction initially
- 160N / 50 mm
- Elongation machine direction at break
- 700%
- Elongation cross direction at break
- 800%
- Nail tear resistance machine direction initial length
- 90N
- Nail tear resistance cross direction initially
- 80N
- Temperature resistance
- -20°C/80°C
